PoE коммутатор Uniview NSW2010-5T-POE-IN
Коммутатор с 4 PoE портами и функцией передачи сигнала, питания до 250 м.
Описание PoE коммутатора Uniview NSW2010-5T-POE-IN
NSW2010-5T-POE-IN — это 4-портовый коммутатор PoE, который обеспечивает 4 PoE порта 10/100Mbps и 1 порт 1/10Mbps. Все порты поддерживают неблокирующую коммутацию и автоматическое MDI/MDIX.
Помимо общих функций коммутатора, NSW2010-5T-POE-IN поддерживает специальный режим для видеонаблюдения — EXTEND. Когда режим EXTEND включен, расстояние передачи с IPC может достигать 250м.
Особенности Uniview NSW2010-5T-POE-IN
- Порты: 5×10/100Mbps Ethernet
- 4 порта 10/100Mbps с поддержкой PoE
- PoE соответствует IEEE802.3af/at, до 30 Вт один порт
- Расстояние передачи до 250 м в режиме EXTEND
- Простота использования, нет необходимости настраивать
- Металлический корпус
- Молниезащита 6KV
Характеристики PoE коммутатора Uniview NSW2010-5T-POE-IN
Item | Description |
Ports | 5×10/100Base-TX autosensing Ethernet ports(4 10/100Mbps ports support PoE) |
Port attribute |
10/100 Mbit/s transfer rate Half-duplex, full-duplex and auto-negotiation Auto MDI/MDIX |
Standards |
IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3af IEEE 802.3at |
MAC | 1K |
Packet forwarding rate | 0.74Mpps |
Switching capacity | 1Gbps |
EXTEND mode |
Standard: the switch functions as a common unmanaged switch and all the ports of the switch can communicate with each other. Extend Mode: If the extend mode is enabled, the transmission distance of both power and data will extend up to 250m(10Mbps), this funcation can replace the extender and parts of the Fiber. It will extend the distance of the whole system and save the cost of the project. |
Status LEDs |
Link/Act (steady yellow): link is normal Link/Act (flashing yellow): data is being forwarded Link/Act (off): no link |
PoE (steady green): the port is powering a powered device properly PoE (off): the port is not connected to any powered device or is not supplying power |
|
Power (steady green): AC input is normal Power (off): AC input is abnormal |
|
PoE |
Port 1 to Port 4 support standard IEEE802.3at/af power( maximum power for each port is 30W), PoE power type is end-span(12+, 36- and 45+, 78- line pair) Max PoE capacity: 57.8W |
Consumption | ≤ 63.7 W |
DC voltage | 51 V , 1.25A |
Operating temperature | 0°C-40°C (32°F-104°F) |
Operating humidity | 10%-90% non-condensing |
Storage temperature | -40°C-70°C (-40°F-158°F) |
Storage humidity | 5%-90% non-condensing |
Dimensions (W×D×H) | 100mm*100mm*26mm |
Certification | FCC,CE,RoHS |